Common Brother Printer Errors with Solution


The Brother Printer errors are shown as alphanumeric codes. If you know what these codes imply, you can understand the problem and solve them accordingly. Do you also see an error message on your Brother Printer machine? Here is a guide covering most common error codes and their solutions.

Error Code: Error: E50

It implies malfunction of fuser unit. The fuser unit is that part of printer which gets hot and binds the print on the paper. This error means either the temperature is too hot or is not hot enough.

Solution:

Switch off the printer for 5 minutes and switch it back on. Leave the machine unattended for 10 minutes without giving any command. If this doesn’t solve the issue, you need to replace the fuser unit.

Error Code: Error: E51

This indicates malfunctioning of laser unit. Laser unit writes the information on the drum surface. This error indicates non-detection of laser beam.

Solution:

Switch the printer off and then on it again. If you see the error again, the laser flap is defective or the laser unit needs replacement.

Error Code: Error: E52

It implies laser motor malfunctioning. You already know what laser unit does (explained above.) There is a spinning mirror and motor inside laser unit that drives it. Thus, this error suggests that the motor is faulty.

Solution:

Like the above two errors this also gets resolved by power off and on. Power off and on helps us identify if the error is genuine or not. If it is genuine, the laser needs replacement.

Error Code: Error: E54

It means malfunctioning of main motor. This motor drives the main gear train which runs all printing functions.

Solution:

Again switch the printer off and on it again. If the error continues, turn on the printer after removing the toner. See if the motor works. If it does, you need to buy another toner. In case you still see the error, replace the main motor.

Error Code: Error: E60

It shows that the fan is malfunctioning. There are four cooling fans in a printer and this error means fault in one of them.

Solution:

Switch the printer off and switch it on again. In case error continues, seek help from a technical engineer to identify and replace the faulty fan.

Can’t see your error here? Get in touch with Brother Printer Support Customer Service to share your printer’s issues. Our professionals resolve all of them. We are accessible 24/7.

 

How to Start Chatting in Yahoo! Mail

chatting-in-yahoo-mail

A real-time conversation is what we always admire. A typical email conversation goes as first you will send an email, then the receiver will read it after a while and then you will get a reply; there is no time limit. This not the disadvantage, of Yahoo mail, but just a typical email conversation. Sometimes you don’t want to wait for an email reply; you can get the conversation on chat.

Yahoo made a brilliant feature of Yahoo messenger chat in Yahoo mail. This enables users to chat with their contacts if they wish. You need to have a valid Yahoo ID for chatting. Don’t be surprised; this is really an interesting feature of Yahoo mail which you haven’t explored yet.

Yahoo chat messenger is the most popular instant messaging. This is really an interesting feature in your Yahoo mail account. You can chat with your Yahoo contacts using it without even switch to an individual Yahoo chat application. We have a guide for you to learn how to chat with somebody in Yahoo! Mail.

Steps to chat with somebody in Yahoo! Mail

The first thing is that you need to make sure you are not using a Yahoo! Mail Basic version, but the fully featured version, because the basic version doesn’t support chat

After that you need to check that you are signed in to chat or not. If you find it is showing offline then change it to available. You can easily choose status “Available, Busy or Invisible” from the given list.

Learn to enable Yahoo! Messenger in Yahoo! Mail

  • The first step is to click the Messenger icon from the top Yahoo mail navigation bar
  • Here you need to check whether your first name is entered under First Name on the Your Messenger Profile sheet or not, if not then enter
  • Then check your surname is entered under Last Name or not, if not then enter
  • And then click on the Next button
  • Your Yahoo mail’s chat messenger has been enabled successfully Chat with somebody in Yahoo mail.
  • First you need to sign into your Yahoo mail account using Yahoo ID and password.
  • Then press “i” to open instant message or chat
  • You can also click Messenger from the top of your Yahoo mail navigation bar and after that click on the Compose icon
  • Now you need to type or select the desired user’s Yahoo Messenger ID or email address and after that press Enter
  • Here you can type away over Add a message
  • And hitting on Enter button will send the message
  • Keep exchanging the message over this messenger and enjoy chatting

If you still face any kind of issue in procedure, let me know in comment section below, or you can contact direct to our Yahoo Customer Care Support Team for  instant help.

 

Tips to Fix Skype Connection Issues

Skype-Connection-Issue

“Sorry, we couldn’t connect to Skype.

Please check your internet connection and try again”

This could be the most annoying message on your Skype window, the moment you wanted to make some important calls or chat. Skype has changed the way we used to converse. It has introduced numerous features in it; you can chat, voice call, video call, file sharing and more with Skype. This all comes with a small application and a decent internet connection. Your Skype account will work on a decent bandwidth internet connection with a particular technical system requirement.

Any error with your Skype account is really annoying. When it’s some error with connecting to Skype; this could be a real pain. Such connection problems make it impossible to initiate or continue a call or conversation. There could be a number of different reasons, we need to fix it. If you are struggling with your Skype connection you never thought to call Skype support. Don’t worry we have found solutions for you. Here we are sharing some tips to fix any connection error with Skype.

Sorry we couldn’t connect to Skype

This error can be fixed with an installation of latest Skype version. This works in most of the cases. If you have the latest version of Skype, and still getting the same error then try these tricks.

  • Check your proxy settings – When you are connected to the internet using a proxy server, then you should connect with manual configuration. This will help you to connect with Skype.
  • Change your password – Sometimes your password is incorrect or might be someone changed it, you can try changing your password to fix the error.
  • Check your firewall settings – The Windows security feature, some antivirus or may be a firewall can block you to access Skype. You can simply deactivate it for a while and get access of Skype.

Some error with your DNS settings

When some issue with your DNS settings, it will block your Skype to connect. When you receive a DNS error message, then chances are that a program might be blocking your Skype, which you installed in your computer system. You can fix it by resetting your Host file to the Windows default files. This will fix the error instantly.

Once you are done with troubleshooting of Skype errors, you should try and connect Skype once again. In most of cases, you will find the solution, but if not, then you can contact Skype Customer Support team for any help. They will guide you with the best possible solution.

How to Setup Hotmail POP Settings for MS Outlook?

hotmail-support

Outlook is an online as well as offline official mailing platform, where you can send or receive emails while having no internet connection. That is the reason to setup Hotmail POP Setting for MS Outlook, such that you could access your Hotmail messages on Outlook, which is one of the most secure and robust platform for all.

How to access POP3 for hotmail?

Let’s follow the given instructions:

  1. On the web interface, press the “gear icon” on the corner at top, right
  2. Choose from the “Options”.

    Based upon the UI version:

    click “Mail/Accounts/POP and IMAP”.

  3. On the “POP options” choose “Yes”.

Steps for Hotmail POP3 SETTINGS for Outlook

Go to Settings >> Accounts >> Incoming
• Server Type: pop-mail.outlook.com
• Server Port: 995
• This server requires a secure connection (SSL): Yes
• User name: Your Windows Live ID, for example [email protected]
• Password: The same password to sign in with Hotmail, Windows Live, or outlook.com

hotmail-pop-setting

Pressing the Outgoing tab

  • SMTP server Address: smtp-mail.outlook.com
  • Server Port Number: 587
  • SMTP Server Requires Authentication? Yes
  • Secure Connection? Yes, select TLS

Are you unable to set up Hotmail POP settings for Outlook? Call official customer care for that!

Do you think of getting help during setup of Hotmail POP 3 for Outlook? If yes! Then call official Hotmail Customer Care or Outlook Technical Support for positive response within 24 to 48 hours. The process may take longer and so the best available option is to call third party Hotmail customer Support, which works independently for authentic and real time solution.

Why third party Hotmail customer-care?

Because we are on board for speedy Hotmail support work! Our technical members are on call day and night without any break! We try to keep up with your pace, so that your work doesn’t get hampered at all! Time is equal to money and we value both! We assure guaranteed solution within few minutes. Help is a call away! Call now!

Outstanding features of our Hotmail customer care!

Direct contact with experts

Instant response

To the point solution

Available 24/7

Availability during weekends and after work-timings

Safe Remote access

Toll free numbers

Easy to execute

How is official Hotmail customer support different from third party support?

Waiting time is longer

Response is slow

Experts are not available round-the-clock

Unavailable during weekends and after work-hours

Confusing answer

No remote Access

Phone on hold for long

Call third party Customer Technical Support now! We are better than the others and the best off course, because we balance in both quality and quantity of the answers. You can easily contact us on phone, email, chat, etc. call to get the best answer within a safe time-frame.

How to Fix the Common Printer Problems?

common-printer-problems

Printers are one of the most important assets in our lives because they serve us in many ways including homework, office work, fax, and scanning of documents. Nowadays, when your children have to get a printout for completing their homework, parents have no choice, but to have it at home.

Common Printer Problems with Its Solutions

However, printers last long and you don’t need help to fix them. Still, you may require some assistance in case of slow printing or not at all printing conditions.

Let’s have a brief look at some of the common annoying problems of printers:

Problem1: Too Slow Printing Process? Try Out The Solution:

Solution:

  • Reduce print quality by selecting Print>>Properties and then choose reduced quality for printing.
  • You may set print quality from Normal to Fast Draft by clicking screen shot at right. (HP Photosmart 8450).
  • Print web pages without graphics
  • Add RAM to the printer you are using.

 

Problem 2: High Cost of Ink and Toner

Solution:

We cannot recommend buying ink or toner from any vendors, who offer refilling at low cost, as they don’t give value for your money at all. Henceforth, we recommend you to buy higher capacity cartridges, such that you could save upon cost. However, for lot of printing work, you need to have 250+ page yield ink cartridge or 2000+ page yield toner cartridge.

 

Problem 3: Wrong Printer Is Getting The Print Job.

Solution:

We are providing instructions for Vista and Windows 7 users. Sometimes, we have seen that without any proper reason, Windows start sending printing job to another computer, which may result in mess at times. To avoid this in Windows 7, you need to follow these instructions:

Click start>>select devices>>Printer>> right click on the desired printer>> set it as default

Thus, you get rid of the trouble and start receiving the prints from the default printer. In case of other versions of Windows, the steps may vary a bit. So, has a look at the below screenshot for Windows 7:

If you’re using earlier versions of Windows, these steps may vary a bit.

 

Problem 4: Printer Is Not Printing At All!

Solution: Let’s check-out the loopholes:

  • Check for the error message
  • Warning light at device
  • Check for paper
  • Check the ink cartridge
  • Check that USB cable is connected to the computer
  • Check connections with wi-fi
  • Check for the default printer and its status.

In this way, you can come out of the general problems of printers without any glitches and enjoy smooth working experience!

 

Official Customer Care Service for Fixing Printer Issues

 If you have any issues in fixing the problems, then you can call the customer care number, email, or chat to find the right solution. You can also take help from forums and blogging sites.

Still have troubles with your printer? – Try our third party technical support for Printers!

 Our third party Printer technical support is deals in all brands of printers widely in Hp printer support, Canon Printer support etc .We are known for its instant response. We hire highly technical resources to bold the issues on the spot! So, if you are nearby or even away from us, call for personal or remote access customer care support for printer issues. Check our services to feel the difference!

How to Set Up a Filter In Yahoo! Mail – Step-By-Step Guide

how-to-add-filter-in-Yahoo-Mail

Do you freak out by seeing your inbox? Are you among those who receive large number of mails? Does it take half of your working time to organize your mails? If yes, then you surely need to use the ‘filters’ option by Yahoo! Mail. The second most used emailing service offers this convenient option to manage email messages easily. Filters allow managing incoming emails automatically based on pre-defined criteria (which will be set by you.)  Let’s see how you can create filters and manage your emails even before you see them.

  1. Open your web browser (Chrome, Firefox, Safari, and Internet Explorer) and type yahoo.com in the address bar.
  2. Click on the ‘Sign in’ button at top right corner. You will be redirected to sign in page (shown in the next step.)

Yahoo-Toolbar

  1. Log into your account with your valid email id and password.

Yahoo-signin-page

  1. In your mailbox, at the top right corner, find gear icon (see the red arrow in the figure below.) Hover your mouse over the icon and select ‘Settings.’

Yahoo-Mail-Page

  1. In the page that follows, select ‘Filters’ option from the left side panel.

Yahoo-Filter-Page

  1. Click on the ‘Add’ button in the right side panel to add a filter (see the picture below.)

Add-Button

  1. ‘Add a new filter’ window will appear; give a suitable name (WorkEmails in the image below) to the filter. Set the required conditions by choosing from ‘contains’, ‘does not contain’, ‘begins with’, ‘ends with’ filters.

Add-New-Filter

  1. Let’s see some examples of setting filters:
  • Suppose you want the emails from particular email id to go to a particular folder. Then in the ‘From’ field select ‘contains’ and type that email id in the next field.
  • Let’s have one more example: In this scenario, you want all the emails with ‘application’ word in the subject to move to a different folder. So in the ‘Subject’ field, select ‘contains’ and write the word ‘application’ in the box next to it.
  • Make sure that ‘match case’ box is unchecked.
  1. Select the move to folder from drop down. You need to create folders before applying filters if you want separate folders. Click ‘Save.’
  1. You will be back on the ‘Settings’ window. The filter you have just created (WorkEmails) will be visible on the right side (you can edit or remove it through the respective buttons after selecting the filter.)

Filter-Page

  1. Click ‘Save’ again to complete the process.

Please note that filters cannot be created in Yahoo! Mail’s basic (classic) version. However, you can use them in the basic version. So, you need to switch to new version, create filter and then use them in both versions.

 

Still have any doubts? Contact Yahoo support services for complete assistance.

7 Tips to Become a Yahoo! Mail Pro

Yahoo-emailing-tips

Yahoo! is the 2nd most popular email service after Google’s Gmail. Millions of users access the Yahoo! Mail everyday across the globe. So, here is a post compiling 7 most useful tips for these users and also for the new members to become a Yahoo! Mail Pro.

Let’s learn.

  1. Set up Yahoo! Mail Signature
  • Take the cursor over the gear icon on the top right corner of your inbox.
  • Click on ‘Settings’ in the drop down.
  • Select ‘Accounts’ and tick the option ‘Append a signature to the emails you send’ under ‘Signature’ heading.
  • Type your desired signature in the text box and click ’Save.’
  1. Create a Group E-mailing List

Creating an emailing list will allow you to send a single message to number of recipients without typing everyone’s email id. Isn’t it a time-saving feature?

  • Click the ‘Contacts’ icon in the top left navigation bar.
  • Select ‘New List’ from the left navigation bar.
  • Enter the desired name you want to assign for the list. Press ‘Enter.’ Just drag and drop the members’ email ids in the list.

This feature is not available in the basic version.

  1. Check Message Spellings

Spelling mistakes in emails cause embarrassment. Correct them with the Yahoo spell checker.

  • After writing the message, click ‘ABC’ on the message formatting bar.
  • Right-click on the words that are underlined red for word suggestions. Select the correct spelling. You can also correct the spelling yourself when you spot the error.
  1. Block a Sender
  • Take the mouse over gear icon and select ‘Settings’ from the menu.
  • Go to ‘Blocked Addresses’ category in the left side panel.
  • In the ‘Add an address’ field, type the email address you want to block.
  • Click ‘Block’ and ‘Save.’
  1. Set up Auto Reply

This feature is useful when you are on a vacation or working on some important project and can’t reply to your emails.

  • Take the mouse over gear icon at top right corner.
  • From the left panel, select ‘Holiday Response.’
  • Tick the ‘Enable automatic responses during these dates (inclusive)’ and select the dates. Type the auto-reply message. You can click on the ‘Send sample copy to me’ button to see how the message will look.
  • Click ‘Save.’
  1. Add New Contacts Automatically

You are not required to add every sender to your contacts. Yahoo will do it for you automatically. You just need to set this command (although it is set by default).

  • Go to ‘Settings’ page from the setting gear icon.
  • Under ‘Writing email’ category, find the ‘When sending’ heading (it is the first heading.)
  • Make sure ‘Automatically add new recipients to Contacts’ option are checked.
  • Click ‘Save.’
  1. Search a Message with Search Operators

Search option is useful for finding that important email from your inbox. Just type your query in the search box and hit ‘Enter.’ If you are sure about exact words in the email, type them within quotes. For instance “project ABC.”

You can search a mail by different fields such as ‘from’, ‘subject’, ‘to:’, ‘cc:’, ‘bcc:’, ‘attachment’ etc. Just use the field name as prefix followed by colons and then your search word. For example, type ‘subject: project’ without quotes in the search box. Yahoo! will list all the emails with word project in its subject field.

Apply these tips and enjoy a smooth Yahoo! emailing experience. Get Yahoo Technical Support on toll-free number for all email related issues.